Ssh List; Ssh Load Privatekey - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

ssh list

Displays the current SSH configuration with the exception of the list of host public
keys.
Mgmt Class
Security (R)
Input Format
ssh list
Parameters
None
Response
A typical response is shown below.
-> ssh list
SSH List
-----------------------
Supported SSH versions: ssh2
Encryption Set: 3des-cbc
MAC Set: hmac-md5
Idle Timeout: 600 seconds.
D-H Rekey Interval: 60 minutes (0=never rekey)
KEEPALIVE msg to detect broken connection: ENABLED
SSH STATUS: ENABLED

ssh load privatekey

Loads a precomputed private-key, from the given TFTP server.
NOTE:
This command should be use in conjunction with the
Mgmt Class
Security (R/W)
Input Format
ssh load publickey tftp@<server-addr>:<priv-key-file>
®
Efficient Networks
Chapter 19: SSH Commands
ssh load publickey command.
Page 19-3