User Set Lookup - Efficient Networks Router family Command Line Interface Manual

Chapter 15: User Commands

user set lookup

Sets the primary and secondary locations to lookup and validate user account
information. To view the current lookup configuration, use the
command.
NOTE:
The Radius client is a Key-Enabled feature and is not functional without entering a
required key. For more information on Radius, see
Mgmt Class
Admin (R/W)
Input Format
user set lookup <primary|secondary> <local|radius|none>
[<primary|secondary> <local|radius|none>]
Parameters
NOTE:
Atleast one location (primary or secondary) must be set to local.
Select the lookup order to configure.
primary
secondary
Select the location of the user database to be accessed.
local
radius
none
Response
A typical response is shown below.
-> user set lookup primary local secondary radius
User Lookup Order - Primary: LOCAL Secondary: RADIUS
Page 15-14
First location to be accessed for user database.
Second location to be accessed for user database.
Local user database will be accessed.
Radius server will be accessed.
No location is specified.
®
Efficient Networks Router family
Command Line Interface Guide
user list lookup
"Radius" on page 5-10.
Efficient Networks
®