System Name - Efficient Networks Router family Command Line Interface Manual

Chapter 4: System Commands

system name

Sets or changes the name of the local router being configured.
A name must be assigned to the local router. This name is sent to a remote router
during PAP/CHAP Security
Mgmt Class
Security (R/W)
Input Format
system name <name>
Parameters
***
a,b
<name>
a
ASCII string
b
The system name is case-sensitive and may be no more than 50 characters.
Example
The following is an example response of name configuration and recall.
-> system name Router1
-> system name
System name: <Router1>
Response
Command prompt.
Page 4-44
Authentication.
Entering the command with no parameter will display the current
router name.
New name of the target router.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®