Ike Ipsec Policies Set Sourceport - Efficient Networks Router family Command Line Interface Manual

Chapter 12: IKE/IPsec Commands

ike ipsec policies set sourceport

Defines a source port filtering parameter value for the policy. The source port
parameter requires a specific source port for the data or allows any source port (*)
(Because port numbers are TCP and UDP specific, a port filter is effective only when
the protocol filter is TCP or UDP.)
Mgmt Class
Security (R/W)
Input Format
ike ipsec policies set sourceport <portnumber | telnet | http |
smtp | tftp | *> <policyname>
Parameters
<portnumber>
telnet
http
snmp
tftp
*
<policyname>
a
ASCII string
b
To see the policy names, use the
Examples
-> ike ipsec policies set sourceport * mypolicy
-> ike ipsec policies set sourceport http webpolicy
Response
Command prompt.
Page 12-20
Source port whose data is allowed by the policy. The port can be
specified by one of the listed names or by its number. To allow data
through for any source port, specify an asterisk (*).
a
Name of the IPsec policy to which the source port parameter value
b
is added.
ike ipsec policies list
Efficient Networks
Command Line Interface Guide
command.
Efficient Networks
®
Router family
®