Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
Examples
The following commands configure the Cisco CMTS so that it can generate a maximum number of 30
SNMP traps and SYSLOG messages for DOCSIS events over a 90-second period:
Router# configure terminal
Router(config)# cable event throttle-interval 90
Router(config)# cable event throttle-threshold 30
Router(config)#
Related Commands
Command
cable event priority
cable event syslog-server
cable event throttle-
adminStatus
cable event throttle-
threshold
snmp-server enable traps
cable
snmp-server enable traps
docsis-cmts
OL-1581-08
Description
Configures the event reporting flags for DOCSIS event messages,
which determines how the Cisco CMTS reports these events.
Enables logging of DOCSIS event messages to a SYSLOG server.
Configures how the Cisco CMTS throttles the SNMP traps and
SYSLOG messages it generates for DOCSIS event messages.
Sets the maximum number of SNMP traps and SYSLOG messages
that the Cisco CMTS can generate for DOCSIS event messages during
the throttle interval.
Enables traps for cable-related events.
Enables traps for DOCSIS-related MAC-layer events.
Cisco Broadband Cable Command Reference Guide
cable event throttle-interval
2-89
Advertisement
Table of Contents
