Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
Examples
The following example shows how to disable IP multicast echo in the cable interface configuration
mode:
router(config-if)# no cable ip-multicast-echo
The following example shows how to enable IP multicast echo in the cable subinterface configuration
mode:
router(config)# interface cable 6/0.1
router(config-subif)# cable ip-multicast-echo
Related Commands
Command
cable ip-broadcast-echo
OL-1581-08
Description
Enables upstream IP broadcast echo so that the Cisco CMTS can echo
broadcast packets.
Cisco Broadband Cable Command Reference Guide
cable ip-multicast-echo
2-121
Advertisement
Table of Contents
