Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
The hccp-delta and hccp-override commands configure the power of the Protect interface at the time
Note
of the switchover. To display the RF power currently being used on a cable interface, use the show
controller cable command.
Related Commands
Command
cable downstream frequency
cable downstream rf-
shutdown
debug cable upconverter
show controllers cable
OL-1581-08
Description
Configures the downstream center frequency on the integrated
upconverter.
Enables or disables the RF output from the integrated upconverter.
Enables debugging of the internal upconverter operation.
Displays status and configuration information for the cable interface,
including the integrated upconverter, if present.
Cisco Broadband Cable Command Reference Guide
cable downstream rf-power
2-63
Advertisement
Table of Contents
