Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
4d17h: DSG: tunnel 0020.0020.0020 is removed
4d17h: DSG: the specified DSG entry has been removed.
Router(config-if)# end
Router#
The following example shows the error message that appears when a unicast IP address is specified
instead of a multicast IP address:
Router(config-if)# cable dsg 1.1.1 172.68.13.10 cisco
Only multicast is supported for current version.
Router(config-if)#
Related Commands
Command
cable dsg keepalive
clear cable dsg
debug cable dsg
show cable dsg
OL-1581-08
Description
Enables keepalive messages over DOCSIS Set-Top Gateway (DSG)
tunnels on a cable interface.
Resets counters related to DOCSIS Set-Top Gateway (DSG) tunnels.
Enables the display of debugging messages for the operation of the
DOCSIS Set-Top Gateway (DSG) feature.
Displays the current DOCSIS Set-Top Gateway (DSG) tunneling
parameters.
Cisco Broadband Cable Command Reference Guide
cable dsg
2-69
Advertisement
Table of Contents
