Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual page 563

Chapter 24 Configuring FICON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
The show rlir erl command shows the list of Nx-ports that are registered to receive the RLIRs with the
switch. If the VSAN ID is not specified, the details are shown for all active VSANs (see Examples
and 24-31).
Example 24-30 Displays All ERLs
switch# show rlir erl
Established Registration List for VSAN: 2
----------------------------------------------
FC-ID
----------------------------------------------
0x0b0200
Total number of entries = 1
Established Registration List for VSAN: 100
----------------------------------------------
FC-ID
----------------------------------------------
0x0b0500
0x0b0600
Total number of entries = 2
In Example
source port is registered as a valid recipient of subsequent RLIRs. This source port is selected as an RLIR
recipient only if no other ERL recipient is selected.
In Example
port is registered as a valid recipient of subsequent RLIRs. This source port is always selected as an LIR
recipient.
If an always receive RLIR is not registered for any N-port or if the delivery of an RLIR fails for one of
Note
those ports, then the RLIR is sent to a port registered to conditional receive RLIRs.
Example 24-31 Displays ERLs for the Specified VSAN
switch# show rlir erl vsan 100
Established Registration List for VSAN: 100
----------------------------------------------
FC-ID
----------------------------------------------
0x0b0500
0x0b0600
Total number of entries = 2
In Examples 24-32, 24-33, and 24-34, if the host time stamp (marked by the *) is available, it is printed
Note
along with the switch time stamp. If the host time stamp is not available, only the switch time stamp is
printed.
OL-6973-03, Cisco MDS SAN-OS Release 2.x
LIRR FORMAT REGISTERED FOR
0x18 always receive
LIRR FORMAT REGISTERED FOR
0x18 conditional receive
0x18 conditional receive
24-30, if the
Registered For
24-30, if the
Registered For
LIRR FORMAT REGISTERED FOR
0x18 conditional receive
0x18 conditional receive
column states that an FC ID is
column states that an FC ID is
Cisco MDS 9000 Family Configuration Guide
Displaying RLIR Information
24-30
, the
conditional receive
, the source
always receive
24-47