Table of Contents
Advertisement
Chapter 35
Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
iSCSI Stats:
FCP Stats:
iSCSI Drop:
FCP Drop:
Buffer Stats:
Displaying Proxy Initiator Information
If the proxy initiator feature is enabled in the iSCSI interface, use the show interface iscsi command to
display configured proxy initiator information (see
Example 35-4 Displays Proxy Initiator Information for the iSCSI Interface with System-Assigned
switch# show interface iscsi 4/1
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Xfer_rdy:1804 (Rcvd:1804)
Data-In:90453 (Rcvd:90463), 92458248 bytes
Response:2352 (Rcvd:2362), with sense 266
TMF Resp:0
Login:attempt:13039, succeed:110, fail:12918, authen fail:0
Rcvd:NOP-Out:914582, Sent:NOP-In:914582
NOP-In:0, Sent:NOP-Out:0
TMF-REQ:0, Sent:TMF-RESP:0
Text-REQ:18, Sent:Text-RESP:27
SNACK:0
Unrecognized Opcode:0, Bad header digest:0
Command in window but not next:0, exceed wait queue limit:0
Received PDU in wrong phase:0
SCSI Busy responses:0
Immediate data failure::Separation:0
Unsolicited data failure::Separation:0, Segment:0
Sequence ID allocation failure:0
Total:Sent:47654
Received:96625 (Error:0, Unknown:0)
Sent:PLOGI:10, Rcvd:PLOGI_ACC:10, PLOGI_RJT:0
PRLI:10, Rcvd:PRLI_ACC:10, PRLI_RJT:0, Error:0, From initiator:0
LOGO:4, Rcvd:LOGO_ACC:0, LOGO_RJT:0
PRLO:4, Rcvd:PRLO_ACC:0, PRLO_RJT:0
ABTS:0, Rcvd:ABTS_ACC:0
TMF REQ:0
Self orig command:10, Rcvd:data:10, resp:10
Rcvd:PLOGI:156, Sent:PLOGI_ACC:0, PLOGI_RJT:156
LOGO:0, Sent:LOGO_ACC:0, LOGO_RJT:0
PRLI:8, Sent:PRLI_ACC:8, PRLI_RJT:0
PRLO:0, Sent:PRLO_ACC:0, PRLO_RJT:0
ADISC:0, Sent:ADISC_ACC:0, ADISC_RJT:0
ABTS:0
Command:Target down 0, Task in progress 0, LUN map fail 0
CmdSeqNo not in window 0, No Exchange ID 0, Reject 0
No task:0
Data-Out:0, Data CRC Error:0
TMF-Req:0, No task:0
Unsolicited data:0, Immediate command PDU:0
Xfer_rdy:0, Data-In:0, Response:0
Buffer less than header size:0, Partial:45231, Split:322
Pullup give new buf:0, Out of contiguous buf:0, Unaligned m_data:0
WWNs
Add header:0
Example 35-4
Cisco MDS 9000 Family Configuration Guide
Configuring iSCSI
and
Example
35-5).
35-31
Advertisement
Table of Contents
