Table of Contents
Advertisement
Chapter 6
Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
If the install all command is ended, be sure to verify the state of the switch at every stage and reissue
Caution
the command after 10 seconds. If you reissue the install all command within the 10-second span, the
command is rejected with an error message indicating that an installation is currently in progress.
Most configurations are disallowed while the install all command is in progress. However,
Tip
configurations coming through the CFS applications are allowed and may affect the upgrade procedure.
Using the install all Command
Ensure that there is enough space available on the active and standby supervisor bootflash: to store the
Note
images being installed, even if the images are supplied in slot0:. The system will automatically
synchronize the images to the standby supervisor.
To perform an automated software upgrade on any switch, follow these steps:
Step 1
Log into the switch through the console, Telnet, or SSH port of the active supervisor.
Step 2
Create a backup of your existing configuration file, if required (see the
Files" section on page
Step 3
Verify that you have enough free space available on the active and standby supervisor module bootflash:.
The download site on Cisco.com shows the size of the system image file in bytes. If there is not adequate
space, delete unused files using the delete filename EXEC command.
switch# dir bootflash:
12288 Jan 01 00:01:06 1980 lost+found/
14765056 Mar 21 15:35:06 2005 m9500-sf1ek9-kickstart-mz.2.1.1.bin
15944704 Apr 06 16:46:04 2005 m9500-sf1ek9-kickstart-mz.2.1.1a.bin
48063243 Mar 21 15:34:46 2005 m9500-sf1ek9-mz.2.1.1.bin
48036239 Apr 06 16:45:41 2005 m9500-sf1ek9-mz.2.1.1a.bin
Usage for bootflash://sup-local
141066240 bytes used
43493376 bytes free
184559616 bytes total
switch# show module
Mod
---
2
5
6
...
OL-6973-03, Cisco MDS SAN-OS Release 2.x
7-1).
Ports
Module-Type
-----
-------------------------------- ------------------ ------------
32
Storage Services Module
0
Supervisor/Fabric-1
0
Supervisor/Fabric-1
"Working with Configuration
Model
Status
DS-X9032-SSM
ok
DS-X9530-SF1-K9
active *
DS-X9530-SF1-K9
ha-standby
Cisco MDS 9000 Family Configuration Guide
Automated Upgrades
6-7
Advertisement
Table of Contents
