Displaying Iscsi Virtual Targets; Displaying Iscsi User Information; Iscsi High Availability; Transparent Target Failover - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

iSCSI High Availability

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Displaying iSCSI Virtual Targets

Use the show iscsi virtual-target to display information about the Fibre Channel targets exported as
iSCSI virtual targets to the iSCSI initiators. The output includes static as well as dynamic targets. See
Example
Example 35-15 Displays Exported Targets
switch# show iscsi virtual-target
target: VT1
* Port WWN 21:00:00:20:37:62:c0:0c
target: VT2
target: iqn.1987-05.com.cisco:05.switch.04-01.2100002037a6be32

Displaying iSCSI User Information

The show user-account iscsi command displays all configured iSCSI user names. See
Example 35-16 Displays iSCSI User Names
switch# show user-account iscsi
username:iscsiuser
secret: dsfffsffsffasffsdffg
username:user2
secret:cshadhdhsadadjajdjas
iSCSI High Availability
The following high availability features are available for iSCSI configurations:
•
•
•
•

Transparent Target Failover

The following high availability configurations are available:
•
•
Cisco MDS 9000 Family Configuration Guide
35-38
35-15.
Configured node
all initiator permit is enabled
Port WWN 21:00:00:04:cf:4c:52:c1
Configured node
all initiator permit is disabled
Port WWN 21:00:00:20:37:a6:be:32 , VSAN 1
Auto-created node
Transparent Target Failover, page 35-38
Multiple IPS Ports Connected to the Same IP Network, page 35-42
VRRP-Based High Availability, page 35-44
Ethernet PortChannel-Based High Availability, page 35-45
iSCSI high availability with host running multi-path software
iSCSI High availability with host not having multi-path software
Chapter 35 Configuring iSCSI
Example
OL-6973-03, Cisco MDS SAN-OS Release 2.x
35-16.