Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual page 110

Mds 9000 family
Table of Contents

Advertisement

Licensing Model
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Table 3-1
Feature License
SAN extension over IP package for IPS-8
modules
(SAN_EXTN_OVER_IP)
SAN extension over IP package for IPS-4
modules
(SAN_EXTN_OVER_IP_IPS4)
SAN extension over IP package for
MPS-14/2 modules
(SAN_EXTN_OVER_IPS2)
Note
Mainframe package
(MAINFRAME_PKG)
Cisco MDS 9000 Family Configuration Guide
3-4
Feature-Based Licenses (continued)
The FCIP, IVR, and SAN extension
tuner features are bundled with the
Cisco MDS 9216i switch and do not
require the SAN extension over IP
package to be installed for the fixed
IP ports on the integrated supervisor`
module. You must install a SAN
extension over IP package if you
install an MPS-14/2, IPS-8, or IPS-4
module in the Cisco MDS9216i
switch.
Chapter 3
Features
The following features apply to IPS-8 and IPS-4
modules:
FCIP
FCIP compression
FCIP write acceleration
FCIP tape acceleration
SAN extension tuner features
IVR over FCIP
IVR NAT over FCIP
The following features apply to the MPS-14/2 module
and the fixed Cisco MDS 9216i IP ports:
FCIP
Hardware-based FCIP compression
FCIP write acceleration
FCIP tape acceleration
SAN extension tuner features
IVR over FCIP
IVR NAT over FCIP
FICON protocol and CUP management
FICON VSAN and intermixing
Switch cascading
Fabric binding
IBM TotalStorage Virtual Tape Server (VTS)
IBM TotalStorage XRC application
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Obtaining and Installing Licenses

Advertisement

Table of Contents
loading

Table of Contents