Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual page 132

Initial Setup Routine
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Enter yes (yes is the default) to configure the default gateway.
Step 8
Configure the default-gateway: (yes/no) [y]: yes
a.
Enter yes (no is the default) to configure advanced IP options such as Inband management, static routes,
Step 9
default network, dns and domain name.
Configure Advanced IP options (yes/no)? [n]: yes
a.
b.
c.
d.
e.
f.
Enter no (yes is the default) to disable Telnet service.
Step 10
Enable the telnet service? (yes/no) [y]: no
Enter yes (no is the default) to enable the SSH service.
Step 11
Enabled SSH service? (yes/no) [n]: yes
Enter the SSH key type (see the
Step 12
would like to generate.
Type the SSH key you would like to generate (dsa/rsa/rsa1)? rsa
Step 13 Enter the number of key bits within the specified range.
Enter the number of key bits? (768 to 1024): 1024
Step 14 Enter no (no is the default) to configure the NTP server.
Configure NTP server? (yes/no) [n]: no
Cisco MDS 9000 Family Configuration Guide
4-12
Enter the default gateway IP address.
IP address of the default gateway: default_gateway
Enter yes (no is the default) at the in-band management configuration prompt.
Continue with in-band (VSAN1) management configuration? (yes/no) [no]: yes
Enter the VSAN 1 IP address.
VSAN1 IP address: ip_address
Enter the subnet mask.
VSAN1 IP net mask: subnet_mask
Enter no (yes is the default) to enable IP routing capabilities.
Enable ip routing capabilities? (yes/no) [y]: no
Enter no (yes is the default) to configure a static route.
Configure static route: (yes/no) [y]: no
Enter no (yes is the default) to configure the default network.
Configure the default-network: (yes/no) [y]: no
Enter no (yes is the default) to configure the DNS IP address.
Configure the DNS IP address? (yes/no) [y]: no
Enter no (no is the default) to skip the default domain name configuration.
Configure the default domain name? (yes/no) [n]: no
"Generating the SSH Server Key Pair" section on page
Chapter 4 Initial Configuration
26-14) that you
OL-6973-03, Cisco MDS SAN-OS Release 2.x