Table of Contents
Advertisement
Automated Upgrades
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
The show module command output shows that the standby supervisor is in slot 6. Use the attach
command to access the supervisor module.
switch# attach module 6
...
switch(standby)# dir bootflash:
12288 Jan 01 00:01:06 1980 lost+found/
14765056 Mar 21 15:35:06 2005 m9500-sf1ek9-kickstart-mz.2.1.1.bin
15944704 Apr 06 16:46:04 2005 m9500-sf1ek9-kickstart-mz.2.1.1a.bin
48063243 Mar 21 15:34:46 2005 m9500-sf1ek9-mz.2.1.1.bin
48036239 Apr 06 16:45:41 2005 m9500-sf1ek9-mz.2.1.1a.bin
Usage for bootflash://sup-local
141066240 bytes used
43493376 bytes free
184559616 bytes total
switch(standby)# exit
switch#
Perform the upgrade by issuing the install all command.
Step 4
Note
switch# install all system bootflash:isan-2.1.2 kickstart bootflash:boot-2.1.2
Verifying image bootflash:/boot-2.1.2
[####################] 100% -- SUCCESS
Extracting "slc" version from image bootflash:/isan-2.1.2.
[####################] 100% -- SUCCESS
Extracting "ips" version from image bootflash:/isan-2.1.2.
Extracting "system" version from image bootflash:/isan-2.1.2.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/boot-2.1.2.
[####################] 100% -- SUCCESS
Extracting "loader" version from image bootflash:/boot-2.1.2.
Compatibility check is done:
Module
------
Images will be upgraded according to following table:
Module
Cisco MDS 9000 Family Configuration Guide
6-8
On a dual supervisor module switch, always use the default bootflash: in the install all command
syntax. Do not qualify it with "//sup-active/" or "//sup-local". Always use the following syntax:
install all system bootflash:filename kickstart bootflash:filename.
bootable
--------
--------------
1
yes
non-disruptive
2
yes
disruptive
3
yes
disruptive
4
yes
non-disruptive
5
yes
non-disruptive
6
yes
non-disruptive
Image
Running-Version
Reason
------------
------
rolling
rolling
Hitless upgrade is not supported
rolling
Hitless upgrade is not supported
rolling
reset
reset
New-Version
Chapter 6
Software Images
Upg-Required
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Advertisement
Table of Contents
