Configuring Gigabit Ethernet High Availability - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Chapter 37 Configuring IP Storage
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Use the show ips stats icmp interface gigabitethernet to display and verify IP statistics. This command
takes the main Ethernet interface as a parameter and returns the ICMP statistics for that interface. See
Example
Example 37-13 Displays ICMP Statistics
switch# show ips stats icmp interface gigabitethernet 2/1
ICMP Statistics for port GigabitEthernet2/1

Configuring Gigabit Ethernet High Availability

Virtual Router Redundancy Protocol (VRRP) and Ethernet PortChannels are two Gigabit Ethernet
features that provide high availability for iSCSI and FCIP services.
OL-6973-03, Cisco MDS SAN-OS Release 2.x
0 drop in persist drops, 0 connections drained
TCP Miscellaneous Stats
115 segments timed, 121 rtt updated
0 retransmit timeout, 0 persist timeout
12 keepalive timeout, 11 keepalive probes
TCP SACK Stats
0 recovery episodes, 0 data packets, 0 data bytes
0 data packets retransmitted, 0 data bytes retransmitted
0 connections closed, 0 retransmit timeouts
TCP SYN Cache Stats
15 entries, 3 connections completed, 0 entries timed out
0 dropped due to overflow, 12 dropped due to RST
0 dropped due to ICMP unreach, 0 dropped due to bucket overflow
0 abort due to no memory, 0 duplicate SYN, 0 no-route SYN drop
0 hash collisions, 0 retransmitted
TCP Active Connections
Local Address
0.0.0.0:3260
37-13.
0 ICMP messages received
0 ICMP messages dropped due to errors
ICMP input histogram
0 destination unreachable
0 time exceeded
0 parameter problem
0 source quench
0 redirect
0 echo request
0 echo reply
0 timestamp request
0 timestamp reply
0 address mask request
0 address mask reply
ICMP output histogram
0 destination unreachable
0 time exceeded
0 parameter problem
0 source quench
0 redirect
0 echo request
0 echo reply
0 timestamp request
0 timestamp reply
0 address mask request
0 address mask reply
Remote Address State
0.0.0.0:0 LISTEN
Cisco MDS 9000 Family Configuration Guide
Configuring Gigabit Ethernet Interfaces
Send-Q Recv-Q
0 0
37-15