Locally Configuring The Device Name - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Password Configuration for Other Devices
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Command
Step 2
switch(config)# fcsp dhchap
password 0 mypassword
switch(config)# fcsp dhchap
password 0 mypassword
30:11:bb:cc:dd:33:11:22
switch(config)# no fcsp dhchap
password 0 mypassword
30:11:bb:cc:dd:33:11:22
switch(config)# fcsp dhchap
password 7 sfsfdf
switch(config)# fcsp dhchap
password 7 sfsfdf
29:11:bb:cc:dd:33:11:22
switch(config)# no fcsp dhchap
password 7 sfsfdf
29:11:bb:cc:dd:33:11:22
switch(config)# fcsp dhchap
password mypassword1
Password Configuration for Other Devices
You can configure passwords in the local authentication database for other devices in a fabric. The other
devices are identified by their device name, which is also know as the switch WWN or device WWN.
The password is restricted to 64 characters and can be specified in clear text (0) or in encrypted text (7).
The switch WWN identifies the physical switch. This WWN is used to authenticate the switch and is
Note
different from the VSAN node WWN.

Locally Configuring the Device Name

To locally configure the device name of another switch in the fabric, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# fcsp dhchap devicename
00:11:22:33:44:aa:bb:cc password NewPassword
switch(config)# no fcsp dhchap devicename
00:11:22:33:44:aa:bb:cc password NewPassword
switch(config)# fcsp dhchap devicename
00:11:55:66:00:aa:bb:cc password 0
NewPassword
switch(config)# fcsp dhchap devicename
00:11:22:33:55:aa:bb:cc password 7 asdflkjh
Cisco MDS 9000 Family Configuration Guide
31-8
Chapter 31
Purpose
Configures a clear text password for the local switch.
Configures a clear text password for the local switch to be used
for the device with the specified WWN.
Removes the clear text password for the local switch to be
used for the device with the specified WWN.
Configures a password entered in an encrypted format for the
local switch.
Configures a password entered in an encrypted format for the
local switch to be used for the device with the specified WWN.
Removes the password entered in an encrypted format for the
local switch to be used for the device with the specified WWN.
Configures a clear text password for the local switch to be used
with any connecting device.
Purpose
Enters configuration mode.
Configures a password for another switch in the
fabric that is identified by the switch WWN
device name.
Removes the password entry for this switch from
the local authentication database.
Configures a clear text password for another
switch in the fabric that is identified by the switch
WWN device name.
Configures a password entered in an encrypted
format for another switch in the fabric that is
identified by the switch WWN device name.
Configuring FC-SP and DHCHAP
OL-6973-03, Cisco MDS SAN-OS Release 2.x