Table of Contents
Advertisement
E-Mail Options
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Command
Step 2
switch(config)# callhome
switch(config-callhome)#
Step 3
switch(config-callhome)# destination-profile
xml-destination alert-group rmon
E-Mail Options
You can configure the from, reply-to, and return-receipt e-mail addresses. While most e-mail address
configurations are optional, you must configure the SMTP server address for the Call Home
functionality to work.
Configuring General E-Mail Options
To configure general e-mail options, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# callhome
switch(config-callhome)#
Step 3
switch(config-callhome)# transport
email from user@company1.com
Step 4
switch(config-callhome)# transport
email reply-to person@place.com
Configuring SMTP Server and Ports
To configure the SMTP server and port, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# callhome
switch(config-callhome)#
Step 3
switch(config-callhome)# transport
email smtp-server 192.168.1.1
switch(config-callhome)# transport
email smtp-server 192.168.1.1 port 30
Cisco MDS 9000 Family Configuration Guide
45-10
Purpose
Enters Call Home submode.
Optional. Configures a destination message
profile (rmon_group) to send Call Home
notifications for configured RMON messages.
Purpose
Enters configuration mode.
Enters Call Home submode.
Optional. Configures the from e-mail address.
Optional. Configures the reply-to e-mail address to which
all responses should be sent.
Purpose
Enters configuration mode.
Enters Call Home submode.
Configures the DNS or IP address of the SMTP server to
reach the server. The port usage defaults to 25 if no port
is specified.
The port number is optional and, if required, may
Note
be changed depending on the server location.
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Chapter 45
Configuring Call Home
Advertisement
Table of Contents
