Table of Contents
Advertisement
Chapter 5
Using the CFS Infrastructure
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
The show cfs lock command displays all the locks that are currently acquired by any application. For
each application the command displays the application name and scope of the lock taken. If the
application lock is taken in the physical scope it indicates the switch WWN, IP address, user name, and
user type of the lock holder. If the application is taken in the logical scope then the VSAN in which the
lock is taken, the domain, IP address, user name, and user type of the lock holder are displayed.(see
Example
Example 5-4
switch# show cfs lock
Application: ntp
Scope
--------------------------------------------------------------------
Switch WWN
--------------------------------------------------------------------
20:00:00:05:30:00:6b:9e
Total number of entries = 1
Application: port-security
Scope
-----------------------------------------------------------
VSAN
-----------------------------------------------------------
1
2
Total number of entries = 2
The show cfs lock name command displays the lock details similar for the specified application.(see
Example
Example 5-5
switch# show cfs lock name ntp
Scope
--------------------------------------------------------------------
Switch WWN
--------------------------------------------------------------------
20:00:00:05:30:00:6b:9e
Total number of entries = 1
The show cfs merge status name command displays the merge status for a given application.
Example 5-6
in all the valid VSANs on the switch. The command shows the scope of merge i.e. logical and the vsan.
It shows the merge status which is one of the following
In case of a successful merge all the switches in the fabric are shown under the local fabric. In case of a
merge failure or a merge being in progress the local fabric and the remote fabric involved in the merge
are indicated separately. The application server in each fabric which is mainly responsible for the merge
is indicated by the term
OL-6973-03, Cisco MDS SAN-OS Release 2.x
5-4)
Displays the Currently Locked Applications
: Physical
IP Address
10.76.100.167
: Logical
Domain
IP Address
238
10.76.100.167
211
10.76.100.167
5-5)
Displays the Lock Information for the Specified Application
: Physical
IP Address
10.76.100.167
displays the output for an application distributing in logical scope shows the merge status
Merge Master
User Name
User Type
admin
CLI/SNMP v3
User Name
User Type
admin
CLI/SNMP v3
admin
CLI/SNMP v3
User Name
User Type
admin
CLI/SNMP v3
Success, waiting, Failure
.
Cisco MDS 9000 Family Configuration Guide
Displaying CFS Configuration Information
or
In Progress
.
5-9
Advertisement
Table of Contents
