Displaying System Status - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Displaying System Status

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Example 50-6 Displays Memory Information About Processes
switch# show processes memory
PID
-----
1277
1278
1279
1293
1294
1295
1296
Where:
•
•
Displaying System Status
Use the show system command to display system-related status information (see
Example
Example 50-7 Displays Default Switch Port States
switch# show system default switchport
System default port state is down
System default trunk mode is on
Example 50-8 Displays Error Information for a Specified ID
switch# show system error-id 0x401D0019
Error Facility: module
Error Description: Failed to stop Linecard Async Notification.
Example 50-9 Displays the System Reset Information
switch# Show system reset-reason module 5
----- reset reason for module 5 -----
1) At 224801 usecs after Fri Nov 21 16:36:40 2003
2) At 922828 usecs after Fri Nov 21 16:02:48 2003
3) At 318034 usecs after Fri Nov 21 14:03:36 2003
4) At 255842 usecs after Wed Nov 19 00:07:49 2003
Cisco MDS 9000 Family Configuration Guide
50-4
MemAlloc StackBase/Ptr
-------- -----------------
120632 7ffffcd0/7fffefe4
56800 7ffffce0/7ffffb5c
1210220 7ffffce0/7ffffbac
386144 7ffffcf0/7fffebd4
1396892 7ffffce0/7fffdff4
214528 7ffffcf0/7ffff904
42064 7ffffce0/7ffffb5c
MemAlloc = total memory allocated by the process.
StackBase/Ptr = process stack base and current stack pointer in hex format.
50-10.
Reason: Reset Requested by CLI command reload
Service:
Version: 1.3(1)
Reason: Reset Requested by CLI command reload
Service:
Version: 1.3(1)
Reason: Reset Requested by CLI command reload
Service:
Version: 1.3(1)
Reason: Reset Requested by CLI command reload
Service:
Version: 1.3(1)
Chapter 50
Process
----------------
xbar_client
wwn
vsan
span
snmpd
rscn
qos
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Monitoring System Processes and Logs
Example 50-7 to