Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual page 190

Mds 9000 family

Table of Contents

Manual Upgrade on a Dual Supervisor Switch

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Copy the software image from a SCP location to one of two targets: bootflash: or slot0:.

The switch remains operational while the image file is copied.

Verify that the file was copied in the required directory.

switch# dir bootflash:

Usage for bootflash://sup-local

135404544 bytes used

49155072 bytes free

184559616 bytes total

Cisco MDS 9000 Family Configuration Guide

Bootflash device (SCP defaults to the bootflash device)—Copy the software image file from the

appropriate SCP file system to the bootflash: file system.

switch# copy scp://server_IP_address/destination_file_name

For example:

switch# copy scp://user@10.1.7.2/system-image bootflash:system-image

The Cisco MDS 9216 Switch does not have an external CompactFlash (see the

with Configuration Files" section on page

the bootflash: file system to copy and verify files.

CompactFlash device—Copy the software image file from the appropriate SCP file system to the

CompactFlash device in slot0: file system.

switch# copy scp://server_IP_address/file_name_in_SCP slot0:system-image

You can also copy the image onto a new Flash disk from a PC and insert it in slot0: in the Cisco

MDS 9500 Series switch. After you copy the image and insert it into the slot0: file system, the

process is the same as the CompactFlash device after the copy command is issued.

Aug 05 15:23:51 1980

Jul 30 23:05:28 1980

Jun 23 14:58:44 1980

Jul 30 23:05:16 1980

Aug 05 15:08:30 1980

Aug 05 15:11:57 1980

7-1). If you are using a switch in this series, use

kickstart-image1

system-image1

kickstart-image2

system-image2

Software Images

OL-6973-03, Cisco MDS SAN-OS Release 2.x