Displaying Fspf Interfaces; Default Settings - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Chapter 21 Configuring Fibre Channel Routing Services and Protocols
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
FSPF Link State Database for VSAN 1 Domain 0xc3(195)
LSR Type
Advertising domain ID
LSR Age
LSR Incarnation number
LSR Checksum
Number of links
NbrDomainId
-----------------------------------------------------------------------------
0x65(101) 0x00001095
0x65(101) 0x00001096
0x65(101) 0x00001097
0x65(101) 0x00001094

Displaying FSPF Interfaces

Example 21-18
•
•
•
•
•
•
•
Example 21-18 Displays FSPF Interface Information
switch# show fspf vsan 1 interface fc1/1
FSPF interface fc1/1 in VSAN 1
FSPF routing administrative state is active
Interface cost is 500
Timer intervals configured, Hello 20 s, Dead 80 s, Retransmit 5 s
FSPF State is FULL
Neighbor Domain Id is 0x0c(12), Neighbor Interface index is 0x0f100000
Statistics counters :
Number of packets received : LSU
Number of packets transmitted : LSU
Number of times inactivity timer expired for the interface = 0

Default Settings

Table 21-4
Table 21-4
Parameters
FSPF
SPF computation
SPF hold time
OL-6973-03, Cisco MDS SAN-OS Release 2.x
= 1
= 0xc3(195)
= 1686
= 0x80000033
= 0x6799
= 4
IfIndex
displays the following information for each selected interface.
Link cost
Timer values
Neighbor's domain ID (if known)
Local interface number
Remote interface number (if known)
FSPF state of the interface
Interface counters
lists the default settings for FSPF features.
Default FSPF Settings
NbrIfIndex Link Type
0x00001085
0x00001086
0x00001087
0x00001084
8 LSA 8 Hello 118
8 LSA 8
Default
Enabled on all E ports and TE ports.
Dynamic.
0.
Cisco MDS 9000 Family Configuration Guide
Cost
1 500
1 500
1 500
1 500
Error packets 0
Hello 119 Retransmitted LSU 0
Default Settings
21-21