[####################] 100% -- Success - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Chapter 6 Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
------
Do you want to continue with the installation (y/n)?
Install is in progress, please wait.
Syncing image bootflash:/boot-2.1.2 to standby.

[####################] 100% -- SUCCESS

Syncing image bootflash:/isan-2.1.2 to standby.
[####################] 100% -- SUCCESS
Jan 18 23:40:03 Hacienda %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configuring console from
Performing configuration copy.
[####################] 100% -- SUCCESS
Module 6: Waiting for module online.
|
Auto booting bootflash:/boot-2.1.2 bootflash:/isan-2.1.2...
Booting kickstart image: bootflash:/boot-2.1.2....
.....................................Image verification OK
Starting kernel...
INIT: version 2.78 booting
Checking all filesystems..r.r.. done.
Loading system software
Uncompressing system image: bootflash:/isan-2.1.2
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCC
INIT: Entering runlevel: 3
Exit the switch console and open a new terminal session to view the upgraded supervisor module using
Step 5
the show module command.
If the configuration meets all guidelines when the install all command is issued, all modules (supervisor
and switching) are upgraded. This is true for any switch in the Cisco MDS 9000 Family.
OL-6973-03, Cisco MDS SAN-OS Release 2.x
---------- --------------------
1 slc
1 bios v1.1.0(10/24/03)
2 ips
2 bios v1.1.0(10/24/03)
3 ips
3 bios v1.1.0(10/24/03)
4 slc
4 bios v1.1.0(10/24/03)
5 system
5 kickstart
5 bios v1.1.0(10/24/03)
5 loader
6 system
6 kickstart
6 bios v1.1.0(10/24/03)
6 loader
--------------------
1.3(2a)
v1.1.0(10/24/03)
1.3(2a)
v1.1.0(10/24/03)
1.3(2a)
v1.1.0(10/24/03)
1.3(2a)
v1.1.0(10/24/03)
1.3(2a)
1.3(2a)
v1.1.0(10/24/03)
1.2(2)
1.3(2a)
1.3(2a)
v1.1.0(10/24/03)
1.2(2)
[n] y
Cisco MDS 9000 Family Configuration Guide
Automated Upgrades
------------
2.1(2) yes
no
2.1(2) yes
no
2.1(2) yes
no
2.1(2) yes
no
2.1(2) yes
2.1(2) yes
no
1.2(2) no
2.1(2) yes
2.1(2) yes
no
1.2(2) no
6-9