Chapter 5
Using the CFS Infrastructure
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
The show cfs peers command displays all the switches in the physical fabric in terms of the switch
WWN and the IP address. The local switch is indicated as
Example 5-8
switch# show cfs peers
Physical Fabric
-------------------------------------------------
Switch WWN
-------------------------------------------------
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
Total number of entries = 2
The show cfs peers name command displays all the peers for which a particular application is registered
with CFS. The output shows all the peers for physical scope or for each of the valid vsans on the switch
depending on the application scope. For physical scope the switch WWN for all the peers are indicated.
The local switch is indicated as
Example 5-9
switch# show cfs peers name ntp
Scope
-------------------------------------------------
Switch WWN
-------------------------------------------------
20:00:00:44:22:00:4a:9e
20:00:00:05:30:01:1b:c2
The show cfs peers name command in
which that application is registered). The local switch is indicated as
Example 5-10 Displays Logical Scope for Each VSAN
switch# show cfs peers name port-security
Scope
-----------------------------------------------------------
Domain
-----------------------------------------------------------
124
98
Total number of entries = 2
Scope
-----------------------------------------------------------
Domain
-----------------------------------------------------------
224
151
Total number of entries = 2
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Displays Peers in the Fabric
IP Address
10.76.100.167
10.76.100.169
Local
Displays Peers for a Specified CFS-Registered Application
: Physical
IP Address
172.22.92.27
172.22.92.215
: Logical [VSAN 1]
Switch WWN
20:00:00:44:22:00:4a:9e
20:00:00:05:30:01:1b:c2
: Logical [VSAN 3]
Switch WWN
20:00:00:44:22:00:4a:9e
20:00:00:05:30:01:1b:c2
Local
[Local]
(see
Example
5-9).
[Local]
Example 5-10
displays all the application peers (all switches in
IP Address
172.22.92.27
[Local]
172.22.92.215
IP Address
172.22.92.27
[Local]
172.22.92.215
Cisco MDS 9000 Family Configuration Guide
Displaying CFS Configuration Information
(see
Example
5-8).
.
Local
5-11
Need help?
Do you have a question about the DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor and is the answer not in the manual?
Questions and answers