Displaying The Configured Ficon State - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Displaying FICON Information
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Example 24-8 Displays the Specified Port Addresses for a FICON Configuration File
switch# show ficon vsan 2 file iplfile1 portaddress 1-7
FICON configuration file IPLFILE1 in vsan 2
...

Displaying the Configured FICON State

If FICON is enabled on a VSAN, you can view the port address information for that VSAN (see
Example
Example 24-9 Displays the Specified Port Address When FICON Is Enabled
switch# show ficon vsan 2 portaddress 55
Port Address 55 is not installed in vsan 2
Cisco MDS 9000 Family Configuration Guide
24-32
Port address 1
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
Port address 2
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
Port address 3
Port name is P3
Port is not blocked
Prohibited port addresses are 0,241-253,255
Port address 7
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
24-9).
Port number is 55, Interface is fc2/23
Port name is
Port is not admin blocked
Prohibited port addresses are 0,241-253,255
Admin port mode is FL
Port mode is FL, FCID is 0xea0000
Chapter 24 Configuring FICON
OL-6973-03, Cisco MDS SAN-OS Release 2.x