Discarding The Distribution Session; Clearing Sessions - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Distributing AAA Server Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Discarding the Distribution Session

Discarding the distribution of a session-in-progress causes the configuration in the temporary buffer to
be dropped. The distribution is no applied.
To discard the RADIUS session-in-progress distribution, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# radius abort
To discard the TACACS+ session-in-progress distribution, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# tacacs+ abort

Clearing Sessions

To clear the ongoing CFS distribution session (if any) and to unlock the fabric for the RADIUS feature,
issue the clear radius session command from any switch in the fabric.
switch# clear radius session
To clear the ongoing CFS distribution session (if any) and to unlock the fabric for the TACACS+ feature,
issue the clear tacacs+ session command from any switch in the fabric.
switch# clear tacacs+ session
Merge Guidelines for RADIUS and TACACS+ Configurations
The RADIUS and TACACS+ server and global configuration are merged when two fabrics merge. The
merged configuration is applied to CFS distribution-enabled switches.
When merging the fabric, be aware of the following conditions:
•
•
•
•
If there is a conflict between two switches in the server ports configured, the merge fails.
Caution
Use the show radius distribution status command to view the status of the RADIUS fabric merge (see
Example
Cisco MDS 9000 Family CLI Configuration Guide
28-18
The server groups are not merged
The server and global keys are not changed during merge
The merged configuration contains all servers found on all CFS enabled switches
The timeout and retransmit parameters of the merged configuration are the largest values found per
server and global.
28-9).
Chapter 28
Purpose
Enters configuration mode.
Discard the RADIUS configuration changes to the running
configuration.
Purpose
Enters configuration mode.
Discard the TACACS+ configuration changes to the running
configuration.
OL-8222-01, Cisco MDS SAN-OS Release 3.x
Configuring RADIUS and TACACS+