Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual page 821

Chapter 35 Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Verify the details of the two iSCSI initiators.
Step 15
switch# show iscsi initiator
iSCSI Node name is iqn.1987-05.com.cisco:01.25589167f74c
iSCSI Node name is 10.11.1.10
View the active zone set. The iSCSI initiators' FCIDs are resolved.
Step 16
switch# show zoneset active
zoneset name zoneset-iscsi vsan 1
zone name iscsi-zone-1 vsan 1
* fcid 0x6d0001 [pwwn 21:00:00:20:37:6f:fd:97]
* fcid 0x6d0301 [symbolic-nodename 10.11.1.10]
zone name iscsi-zone-2 vsan 1
* fcid 0x6d0101 [pwwn 21:00:00:20:37:6f:fe:54]
* fcid 0x6d0201 [pwwn 21:00:00:20:37:a6:a6:5d]
* fcid 0x6d0300 [symbolic-nodename
iqn.1987-05.com.cisco:01.25589167f74c]
The Fibre Channel name server shows the virtual N ports created for the iSCSI hosts.
Step 17
switch# show fcns database
VSAN 1:
--------------------------------------------------------------------------
FCID
--------------------------------------------------------------------------
0x6d0001
0x6d0101
0x6d0201
0x6d0300
0x6d0301
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Initiator ip addr (s): 10.15.1.11
iSCSI alias name: oasis11.cisco.com
Node WWN is 20:02:00:0b:fd:44:68:c2 (dynamic)
Member of vsans: 1
Number of Virtual n_ports: 1
Virtual Port WWN is 20:03:00:0b:fd:44:68:c2 (dynamic)
Interface iSCSI 7/5, Portal group tag: 0x304
VSAN ID 1, FCID 0x6d0300
iSCSI Initiator name: iqn.1987 - 05.com.cisco:01.e41695d16b1a
iSCSI alias name: oasis10.cisco.com
Node WWN is 20:04:00:0b:fd:44:68:c2 (dynamic)
Member of vsans: 1
Number of Virtual n_ports: 1
Virtual Port WWN is 20:05:00:0b:fd:44:68:c2 (dynamic)
Interface iSCSI 7/1, Portal group tag: 0x300
VSAN ID 1, FCID 0x6d0301
TYPE PWWN
NL 21:00:00:20:37:6f:fd:97 (Seagate)
NL 21:00:00:20:37:6f:fe:54 (Seagate)
NL 21:00:00:20:37:a6:a6:5d (Seagate)
N 20:03:00:0b:fd:44:68:c2 (Cisco)
N 20:05:00:0b:fd:44:68:c2 (Cisco)
iSCSI Authentication Setup Guidelines and Scenarios
<------------------------
<-------------
<-------------------------
(VENDOR)
Cisco MDS 9000 Family Configuration Guide
Host 2: Initiator
<---------
ID based on node
name because the
initiator is
entering iSCSI
interface 7/5
Host 1: Initiator
ID based on IP
address because
the initiator is
entering iSCSI
interface 7/1
FCID resolved for
host 1
FCID for host 2
FC4-TYPE:FEATURE
scsi-fcp:target
scsi-fcp:target
scsi-fcp:target
scsi-fcp:init isc..w
scsi-fcp:init isc..w
35-51