Default Settings - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Example 44-8 Displays Switching Module Logging Status
switch# show logging module
Logging linecard:
Example 44-9 Displays Monitor Logging Status
switch# show logging monitor
Logging monitor:
Example 44-10 Displays Server Information
switch# show logging server
Logging server:
{172.22.95.167}
{172.22.92.58}
Default Settings
Table 44-4
Table 44-4
Parameters
System message logging to the console
System message logging to Telnet sessions
Logging file size
Log file name
Logging server
Syslog server IP address
Number of servers
Server facility
Cisco MDS 9000 Family Configuration Guide
44-14
server severity:
server facility:
server severity:
server facility:
lists the default settings for system message logging.
Default System Message Log Setting
Chapter 44
enabled (Severity: debugging)
enabled (Severity: information)
enabled
debugging
local7
debugging
local7
Default
Enabled for messages at the critical severity level.
Disabled.
4194304.
Message (change to a name with up to 200 characters).
Disabled.
Not configured.
Three servers.
Local 7.
Configuring System Message Logging
OL-6973-03, Cisco MDS SAN-OS Release 2.x