Default Settings - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Example 19-30 Displays the Difference between the Pending and Effective Zone Information for the
switch# show zone pending-diff vsan 2
zone name testzone vsan 2
-
+
Exchange Switch Support (ESS) defines a mechanism for two switches to exchange various supported
features (see
Example 19-31 Displays the ESS Information for All Switches in the Specified VSAN
switch# show zone ess vsan 2
ESS info on VSAN 2 :
Example 19-32 Displays the Pending fcalias Information for the VSAN to be Committed
switch# show fcalias pending vsan 2
No pending info found
Default Settings
Table 19-5
Table 19-5
Parameters
Default zone policy
Full zone set distribute
Zone based traffic priority
Read-only zones
Broadcast frames
Broadcast zoning
Enhanced zoning
Cisco MDS 9000 Family Configuration Guide
19-36
Specified VSAN
member pwwn 21:00:00:20:37:4b:00:a2
member pwwn 21:00:00:20:37:60:43:0c
Example 19-30).
Domain : 210, SWWN : 20:02:00:05:30:00:85:1f, Cap1 : 0xf3, Cap2 : 0x0
lists the default settings for basic zone parameters.
Default Basic Zone Parameters
Chapter 19 Configuring and Managing Zones
Default
Denied to all members.
The full zone set(s) is not distributed.
Low.
Read-write attributes for all zones.
Sent to all Nx ports.
Disabled.
Disabled.
OL-6973-03, Cisco MDS SAN-OS Release 2.x