Download  Print this page

Cisco AJ732A - MDS 9134 Fabric Switch Release Note

Cisco mds 9000 family release notes for cisco mds san-os release 3.2(1) (ol-14116-01-d0, september 2007)
Hide thumbs

Advertisement

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Cisco MDS 9000 Family Release Notes
for Cisco MDS SAN-OS Release 3.2(1)
Release Date: September 17, 2007
Part Number: OL-14116-01 D0
This document describes the caveats and limitations for switches in the Cisco MDS 9000 Family. Use
this document in conjunction with documents listed in the
Release notes are sometimes updated with new information on restrictions and caveats. Refer to the
Note
following website for the most recent version of the Cisco MDS 9000 Family Release Notes:
http://www.cisco.com/en/US/products/hw/ps4159/ps4358/prod_release_notes_list.html
Table 1
Table 1
Revision
A0
B0
C0
D0
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2007 Cisco Systems, Inc. All rights reserved.
shows the on-line change history for this document.
Online History Change
Date
09/17/2007
09/20/2007
09/24/2007
09/27/2007
"Related Documentation" section on page
Description
Created release notes.
Added a limitation to the
"Cisco MDS 9222i Multiservice
Modular Switch and Cisco MDS 9000 18/4-Port Multiservice
Module"
section.
Added the
"SAN Device Virtualization
Modified the Symptom of DDTS CSCsj24904.
Added a Workaround to DDTS CSCsi56167.
Added DDTS CSCsg49151, CSCsk49029, CSCsk49634, and
CSCsk49761.
Added DDTS CSCsh05721, CSCsh70152, CSCsi03043, and
CSCsi78480.
Rev ised the list of Supported Software in the
Your Version of Cisco Fabric Manager"
Added DDTS CSCsi56949.
42.
Scalability"section.
"Upgrading
section.

Advertisement

loading

  Related Manuals for Cisco AJ732A - Cisco MDS 9134 Fabric Switch

  Summary of Contents for Cisco AJ732A - Cisco MDS 9134 Fabric Switch

  • Page 1 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1) Release Date: September 17, 2007...
  • Page 2: Table Of Contents

    Contents S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Contents This document includes the following sections: Introduction, page 2...
  • Page 3 Components Supported S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 2 Cisco MDS 9000 Family Supported Software and Hardware Components Component...
  • Page 4 Components Supported S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 2 Cisco MDS 9000 Family Supported Software and Hardware Components (continued) Component...
  • Page 5 Components Supported S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 2 Cisco MDS 9000 Family Supported Software and Hardware Components (continued) Component...
  • Page 6 Components Supported S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 2 Cisco MDS 9000 Family Supported Software and Hardware Components (continued) Component...
  • Page 7 Components Supported S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 2 Cisco MDS 9000 Family Supported Software and Hardware Components (continued) Component...
  • Page 8: Software Download Process

    Software Download Process S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m 2.
  • Page 9 Software Download Process S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m At a minimum, you need to disable the default device alias distribution feature using the no device-alias distribute command in global configuration mode.
  • Page 10 Software Download Process S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Use the show module command to display the type of supervisor module in the switch.
  • Page 11: Upgrading Your Cisco Mds San-Os Software Image

    Upgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m http://www.cisco.com/en/US/products/ps5989/products_device_support_table09186a00805037ee.html Upgrading Your Cisco MDS SAN-OS Software Image This section lists the guidelines recommended for upgrading your Cisco MDS SAN-OS software image...
  • Page 12 Upgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Oracle Database 10g Express •...
  • Page 13 Upgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Set Java 1.5 to the path that is to be used for installing Fabric Manager.
  • Page 14 Upgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m SSM: Intelligent services traffic on the SSM, such as SANTap, NASB, and FC write –...
  • Page 15 Upgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 6 Nondisruptive Upgrade Path to SAN-OS Release 3.2(1) (continued) Current...
  • Page 16: Upgrading An Mds 9216 Switch With Iscsi Enabled

    Upgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 7 FICON Nondisruptive Upgrade Path to SAN-OS 3.2(1) Current Release with...
  • Page 17: Reconfiguring Ssm Ports Before Upgrading To San-Os Release 3.2(1)

    Upgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m then follow the upgrade guidelines listed in the “Upgrading Your Version of Cisco Fabric Manager”...
  • Page 18 Upgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m To avoid any traffic disruption, modify the configuration of the SSM ports as described below, before Note upgrading a SAN-OS software image prior to Release 3.2(1).
  • Page 19: Upgrading The Ssi Image On Your Ssm

    Upgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m switch# copy running-config startup-config Upgrading the SSI Image on Your SSM Use the following guidelines to nondisruptively upgrade the SSI image on your SSM:...
  • Page 20: Upgrading A Cisco Mds 9124 Switch

    Upgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Prior to installing the new image, copy the old (existing) system image file to an external server.
  • Page 21: Downgrading Your Cisco Mds San-Os Software Image

    Downgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m If you are performing an upgrade on one of those switches, you should follow the nondisruptive upgrade path shown in Table...
  • Page 22 Downgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m IVR: With IVR enabled, you must follow additional steps if you are downgrading from Cisco –...
  • Page 23 Downgrading Your Cisco MDS SAN-OS Software Image S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 8 Nondisruptive Downgrade Path from SAN-OS Release 3.2(1) To SAN-OS Release Nondisruptive Downgrade Path...
  • Page 24: New Features In Cisco Mds San-Os Release 3.2(1)

    New Features in Cisco MDS SAN-OS Release 3.2(1) S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m The EPLD version on the SSM is at 0x07 or higher.
  • Page 25 New Features in Cisco MDS SAN-OS Release 3.2(1) S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 18/4-Port Multiservice Module FIPS (MSFM-18/4) The Cisco MDS 9000 Family 18/4-Port Multiservice Federal Information Processing Standards (FIPS) Module is a FIPS 140-2 Level 3–compliant version of the Cisco MSM-18/4 Module.
  • Page 26: Fips Support

    New Features in Cisco MDS SAN-OS Release 3.2(1) S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Digital Diagnostic Enhancements The digital diagnostics capabilities for small form-factor pluggable (SFP) and 10 Gbps X2 form factor optics have been enhanced in Cisco SAN-OS release 3.2(1):...
  • Page 27 New Features in Cisco MDS SAN-OS Release 3.2(1) S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m SMI-S Enhancements Indications supported has been expanded to allow meaningful monitoring of Cisco MDS 9000 family switches.
  • Page 28 New Features in Cisco MDS SAN-OS Release 3.2(1) S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco Fabric Manager is no longer embedded in the SAN-OS software, which means that Fabric •...
  • Page 29: Changes In Existing Features

    Changes in Existing Features S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Threshold Configuration Flexibility Cisco Fabric Manager Server allows two performance thresholds to be configured for throughput values for connections to end devices and inter-switch links (ISLs).
  • Page 30 Limitations and Restrictions S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m the administrator validates the DMM job from the CLI or restarts or schedules the DMM job from Fabric Manager, the operation fails.
  • Page 31 Limitations and Restrictions S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m The Cisco MDS 9222i and the MSM-18/4 do not support Ether channel.
  • Page 32 Limitations and Restrictions S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m If port 80 on the switch is blocked and you are using VPN, Fabric Manager cannot detect NAT •...
  • Page 33: Caveats

    Caveats S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Configuring Default Settings for the Default Zone Following an upgrade from any Cisco SAN-OS 2.x release to any Cisco SAN-OS 3.x release, the configuration defined by the zone default-zone permit vsan vsan-id command is applied only to the...
  • Page 34 Caveats S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 10 Open Caveats and Resolved Caveats Reference (continued) DDTS Number...
  • Page 35 Caveats S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Workaround: This issue is resolved.
  • Page 36 Caveats S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m All known resource leaks in the CIM Server have been fixed.
  • Page 37: Open Caveats

    Caveats S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Workaround: This issue is resolved.
  • Page 38 Caveats S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m %IPS_SB_MGR-SLOT1-3-CRYPTO_FAILURE: Heartbeat failure in encryption engine (error 0x1) %ETHPORT-5-IF_DOWN_SOFTWARE_FAILURE: Interface GigabitEthernet1/1 is down (Port...
  • Page 39 Caveats S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Workaround: Use the show ivr internal vdri vsan vsan-id domain domain command to determine which border switch is exporting the virtual domain.
  • Page 40 Caveats S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Workaround: None.
  • Page 41 Caveats S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Symptom: The response time shown in the output of a ping ip-address command may not be accurate if there is an MDS MSM -8/4 in the path.
  • Page 42: Related Documentation

    Related Documentation S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Documentation The documentation set for the Cisco MDS 9000 Family includes the following documents.
  • Page 43: Troubleshooting And Reference

    Related Documentation S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Command-Line Interface Cisco MDS 9000 Family Software Upgrade and Downgrade Guide •...
  • Page 44: Obtaining Documentation, Obtaining Support, And Security Guidelines

    Obtaining Documentation, Obtaining Support, and Security Guidelines S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Obtaining Documentation, Obtaining Support, and Security Guidelines For information on obtaining documentation, obtaining support, providing documentation feedback,...