Table of Contents
Advertisement
Corrupted Bootflash Recovery
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Press the Tab key to select the Basic CMOS Configuration.
Step 4
You see the BIOS Setup CMOS Configuration screen (see
Figure 6-5
Change the Boot 1st: field to TFTP.
Step 5
Press the Tab key until you reach the Local IP Address field.
Step 6
Step 7
Enter the local IP address for the switch, and press the Tab key.
Step 8
Enter the subnet mask for the IP address, and press the Tab key.
Enter the IP address of the default gateway, and press the Tab key.
Step 9
Enter the IP address of the TFTP server, and press the Tab key.
Step 10
Enter the image name (kickstart), and press the Tab key. This path should be relative to the TFTP server
Step 11
root directory.
The file name must be entered exactly as it is displayed on your TFTP server. For example, if you have
Caution
a file name MDS9500-kiskstart_mzg.10, then enter this name using the exact uppercase characters and
file extensions as shown on your TFTP server.
Cisco MDS 9000 Family Configuration Guide
6-32
BIOS Setup Configuration (CMOS)
Chapter 6
Figure
6-5).
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Software Images
Advertisement
Table of Contents
