Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual page 479

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Configuring Fibre Channel Routing Services and
Protocols
Fabric Shortest Path First (FSPF) is the standard path selection protocol used by Fibre Channel fabrics.
The FSPF feature is enabled by default on all Fibre Channel switches. Except in configurations that
require special consideration, you do not need to configure any FSPF services. FSPF automatically
calculates the best path between any two switches in a fabric. Specifically, FSPF is used to:
Dynamically compute routes throughout a fabric by establishing the shortest and quickest path
•
between any two switches.
Select an alternative path in the event of the failure of a given path. FSPF supports multiple paths
•
and automatically computes an alternative path around a failed link. It provides a preferred route
when two equal paths are available.
This chapter provides details on Fibre Channel routing services and protocols. It includes the following
sections:
FSPF Features, page 21-2
•
FSPF Examples, page 21-2
•
FSPF Global Configuration, page 21-4
•
FSPF Interface Configuration, page 21-6
•
• Configuring Fibre Channel Routes, page 21-8
Clearing FSPF Counters, page 21-9
•
• Broadcast and Multicast Routing, page 21-10
Broadcast and Multicast Routing, page 21-10
•
• In-Order Delivery, page 21-10
Flow Statistics Configuration, page 21-15
•
Displaying Routing and Forwarding Information, page 21-17
•
Default Settings, page 21-21
•
OL-6973-03, Cisco MDS SAN-OS Release 2.x
C H A P T E R
Cisco MDS 9000 Family Configuration Guide
21
21-1