Displaying Fcs Information - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Chapter 46 Configuring Fabric Configuration Servers
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
To enable global checking of the platform name, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# fcs plat-check-global vsan 1
switch(config)# no fcs plat-check-global vsan 1
To register platform attributes, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# fcs register
switch(config-fcs-register)#
Step 3
switch(config-fcs-register)# platform name
SamplePlatform vsan 1
switch(config-fcs-register-attrib)#
switch(config-fcs-register)# no platform name
SamplePlatform vsan 1
switch(config-fcs-register)#
Step 4
switch(config-fcs-register-attrib)# mgmt-addr
1.1.1.1
switch(config-fcs-register)# no mgmt-addr
1.1.1.1
Step 5
switch(config-fcs-register-attrib)# nwwn
11:22:33:44:55:66:77:88
switch(config-fcs-register)# no nwwn
11:22:33:44:55:66:77:88
Step 6
switch(config-fcs-register-attrib)# type 5
switch(config-fcs-register)# no type 5
Step 7
switch(config-fcs-register-attrib)# exit
Step 8
switch(config-fcs-register)# exit
switch(config)#

Displaying FCS Information

Use the show fcs commands to display the status of the WWN configuration (see Example
Example 46-1 Displays FCS Local Database Information
switch# show fcs database
FCS Local Database in VSAN: 1
------------------------------
Switch WWN
Switch Domain Id
Switch Mgmt-Addresses
OL-6973-03, Cisco MDS SAN-OS Release 2.x
: 20:01:00:05:30:00:16:df
: 0x7f(127)
: snmp://172.22.92.58/eth-ip
http://172.22.92.58/eth-ip
Displaying FCS Information
Purpose
Enters configuration mode.
Enables global checking of platform name.
Disables (default) global checking of
platform name.
Purpose
Enters configuration mode.
Enters the FCS registration submode.
Enters the FCS registration attributes submode.
Deletes a registered platform.
Configures the platform management address.
Deletes all management addresses on the
platform.
Configures the platform node name.
Deletes the platform node name.
Configures the fc-gs-3 defined platform type.
Deletes the configured type and reverts the
switch to its factory default of unknown type.
Exits the FCS registration attributes submode.
Exits the FCS registration submode.
Cisco MDS 9000 Family Configuration Guide
46-1 to 46-9).
46-3