Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual page 452

Renaming Zones, Zone Sets, fcaliases, and Zone Attribute Groups
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Command
Step 3
switch123(config-zone)# attribute
read-only
switch123(config-zone)# no attribute
read-only
Renaming Zones, Zone Sets, fcaliases, and Zone Attribute
Groups
To rename a zone, zone set, fcalias, or zone-attribute-group, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# zoneset rename oldname newname
vsan 2
switch(config)# zone rename oldname newname vsan 2
switch(config)# fcalias rename oldname newname
vsan 2
switch(config)# zone-attribute-group rename
oldname newname vsan 2
Step 3
switch(config)# zoneset activate name newname
vsan 2
Cloning Zones, Zone Sets, fcaliases, and Zone Attribute Groups
As of Cisco MDS SAN-OS Release 2.1(1a), you can clone a zone, zone set, fcalias, or
zone-attribute-group.
To clone a zone, zone set, fcalias, or zone-attribute-group, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# zoneset clone oldname newname
vsan 2
switch(config)# zone clone oldname newname vsan 2
switch(config)# fcalias clone oldname newname
vsan 2
switch(config)# zone-attribute-group clone
oldname newname vsan 2
Step 3
switch(config)# zoneset activate name newname
vsan 2
Cisco MDS 9000 Family Configuration Guide
19-20
Chapter 19 Configuring and Managing Zones
Purpose
Sets read-only attributes for the default zone.
Reverts the default zone attributes to read-write
(default).
Purpose
Enters configuration mode.
Renames a zone set in the specified
VSAN.
Renames a zone in the specified VSAN.
Renames a fcalias in the specified VSAN.
Renames a zone attribute group in the
specified VSAN.
Activates the zone set and updates the new
zone name in the active zone set.
Purpose
Enters configuration mode.
Clones a zone set in the specified VSAN.
Clones a zone in the specified VSAN.
Clones a fcalias in the specified VSAN.
Clones a zone attribute group in the
specified VSAN.
Activates the zone set and updates the new
zone name in the active zone set.
OL-6973-03, Cisco MDS SAN-OS Release 2.x