Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual page 715

Chapter 32 Configuring Port Security
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Table 32-2
Scenario Device Connection Request
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Port Security Configuration Distribution
The port security feature uses the Cisco Fabric Services (CFS) infrastructure to enable efficient database
management, provide a single point of configuration for the entire fabric in the VSAN, and enforce the
port security policies on throughout the fabric (see
Enabling Distribution
All the configurations performed in distributed mode are stored in a pending (temporary) database. If
you modify the configuration, you need to commit or discard the pending database changes to the
configurations. The fabric remains locked during this period. Changes to the pending database are not
reflected in the configurations until you commit the changes.
To enable the port security distribution, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# port-security distribute
switch(config)# no port-security distribute
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Authorization Results for Scenario (continued)
P5, N1, F5
P3, N3, F4
S1, F10
S2, F11
P4, N4, F5 (auto-learn on)
P4, N4, F5(auto-learn off)
S3, F5 (auto-learn on)
S3, F5 (auto-learn off)
P1, N1, F6 (auto-learn on)
P5, N5, F1 (auto-learn on)
S3, F4 (auto-learn on)
S1, F3 (auto-learn on)
P5, N3, F3
P7, N3, F9
Authorization Condition
Denied 2
Permitted 1
Permitted 1
Denied 7
Permitted 3
Denied 4
Permitted 3
Denied 4
Denied 2
Denied 7
Denied 7
Permitted 5
Permitted 6
Permitted 6
Chapter 5, "Using the CFS
Purpose
Enters configuration mode.
Enables distribution.
Disables distribution.
Cisco MDS 9000 Family Configuration Guide
Port Security Configuration Distribution
Reason
N1 is only allowed on F2.
No conflict.
No conflict.
P10 is bound to F11.
No conflict.
No match.
No conflict.
No match.
P1 is bound to F1.
P3 is bound to F1.
P3 paired with F4.
No conflict.
Wildcard ( * ) match for F3 and
N3.
Wildcard ( * ) match for N3.
Infrastructure").
32-9