Interpreting The Current Status - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Chapter 50 Monitoring System Processes and Logs
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Interpreting the Current Status

The status of each module or test depends on the current configured state of the OHMS test in that
particular module (see
Table 50-1
Status
Enabled
Disabled
Running
Failing
Failed
Stopped
Internal failure
Diags failed
On demand
Suspended
The status of each test in each module is visible when you display any of the show system health
commands. See the
Displaying System Health
Use the show system health command to display system-related status information (see
to Example
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Table 50-1).
OHMS Configured Status for Tests and Modules
Description
You have currently enabled the test in this module and the test is not running.
You have currently disabled the test in this module.
You have enabled the test and the test is currently running in this module.
This state is displayed if a failure is imminent for the test running in this
module—possibility of test recovery exists in this state.
The test has failed in this module—and the state cannot be recovered.
The test has been internally stopped in this module by the Cisco SAN-OS
software.
The test encountered an internal failure in this module. For example, the system
health application is not able to open a socket as part of the test procedure.
The startup diagnostics has failed for this module or interface.
The system health external-loopback or the system health internal-loopback tests
are currently running in this module. Only these two commands can be issued on
demand.
Only encountered in the MDS 9100 Series due to one oversubscribed port
moving to a E or TE port mode. If one oversubscribed port moves to this mode,
the other three oversubscribed ports in the group are suspended.
"Displaying System Health" section on page
50-23).
Online System Health Management
50-15.
Cisco MDS 9000 Family Configuration Guide
Example 50-18
50-15