Call Home Communications Test; Database Merge Guidelines; Displaying Call Home Information - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Call Home Communications Test

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Database Merge Guidelines

Refer to the
When merging two Call Home databases, follow these guidelines:
•
•
Call Home Communications Test
Use the test command to simulate a message generation.
To test the Call Home function, follow these steps:
Command
Step 1
switch# callhome test
trying to send test callhome message
successfully sent test callhome message
Step 2
switch# callhome test inventory
trying to send test callhome message
successfully sent test callhome message

Displaying Call Home Information

Use the show callhome command to display the configured Call Home information (see Examples
to 45-7).
Example 45-1 Displays Configured Call Home Information
switch# show callhome
callhome enabled
Callhome Information:
contact person name:who@where
contact person's email:person@place.com
contact person's phone number:310-408-4000
street addr:1234 Picaboo Street, Any city, Any state, 12345
site id:Site1ManhattanNewYork
customer id:Customer1234
contract id:Cisco1234
switch priority:0
Cisco MDS 9000 Family Configuration Guide
45-14
"CFS Merge Support" section on page 5-7
Be aware that the merged database contains the following information:
A superset of all the destination profiles from the dominant and subordinate switches take part
–
in the merge protocol.
The e-mail addresses and alert groups for the destination profiles.
–
Other configuration information (for example, message throttling, periodic inventory) from the
–
switch which existed in the dominant switch before the merge.
Verify that two destination profiles do not have the same name (even if they have different
configuration information) on the subordinate and dominant switches. If they do contain the same
name, the merge operation will fail. You must then modify or delete the conflicting destination
profile on the required switch.
Chapter 45
for detailed concepts.
Purpose
Sends a test message to the configured destination(s).
Sends a test inventory message to the configured
destination(s).
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Configuring Call Home
45-1