Configuring Persistent Fc Ids For Ivr - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Configuring Persistent FC IDs for IVR

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
You can configure two types of database entries for IVR FC IDs:
•
•
If you use persistent FC IDs for IVR, we recommend that you use them for all the devices in the IVR
Note
zoneset. We do not recommend using persistent FC IDs for some of the IVR devices while using
automatic allocation for others.
In an IVR-NAT configuration, if one VSAN in the IVR topology is configured with static domain IDs,
Note
then the IVR domains that can be exported to that VSAN must also be assigned static domains.
Configuring Persistent FC IDs for IVR
To configure persistent FC IDs for IVR in Cisco MDS SAN-OS Release 2.1(2) and later, follow these
steps:
Command
Step 1
switch# config t
Step 2
switch(config)# ivr fcdomain database
autonomous-fabric-num 21 vsan 22
switch(config-fcdomain)#
switch(config)# no ivr fcdomain database
autonomous-fabric-num 21 vsan 22
Cisco MDS 9000 Family Configuration Guide
18-18
Virtual domain entries—Contain the virtual domain that should be used to represent a native VSAN
in a specific VSAN (current VSAN). These entries contain the following information:
Native AFID
–
Native VSAN
–
Current AFID
–
Current VSAN
–
– Virtual domain to be used for the native AFID and VSAN in current AFID and VSAN
Virtual FC ID entries—Contain the virtual FC ID that should be used to represent a device in a
specific VSAN (current VSAN). These entries contain the following information:
– Port WWN
Current AFID
–
Current VSAN
–
Virtual FC ID to be used to represent a device for the given pWWN in the current AFID and
–
VSAN
Chapter 18 Configuring Inter-VSAN Routing
Purpose
Enters configuration mode.
Enters IVR fcdomain database
configuration submode for current
AFID 21 and VSAN 22.
Deletes all the database entries,
including all the corresponding
persistent FC ID entries, for current
AFID 21 and VSAN 22.
OL-6973-03, Cisco MDS SAN-OS Release 2.x