Clearing Fspf Counters - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Chapter 21 Configuring Fibre Channel Routing Services and Protocols
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
To configure an FC route, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# fcroute 0x111211
interface fc1/1 domain 3 vsan 2
switch(config)#
switch(config)# fcroute 0x111211
interface port-channel 1 domain 3 vsan 4
switch(config)#
switch(config)# fcroute 0x031211
interface fc1/1 domain 3 metric 1 vsan 1
switch(config-if)#
switch(config)# fcroute 0x111112
interface fc1/1 domain 3 metric 3 remote
vsan 3
Step 3
switch(config)# fcroute 0x610000
0xff0000 interface fc 1/1 domain 1 vsan
2
switch(config)#
1. FIB = Forwarding Information Base

Clearing FSPF Counters

To clear the FSPF statistics counters for one interface or for the entire VSAN, follow this step:
Command
Step 1
switch# clear fspf counters vsan 1
switch#
switch# clear fspf counters vsan 200 interface fc1/1
switch#
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Purpose
Enters configuration mode.
Configures the route for the specified Fibre Channel
interface and domain. In this example, interface fc1/1
is assigned an FC ID (0x111211) and a domain ID (3)
to the next hop switch.
Configures the route for the specified PortChannel
interface and domain. In this example, interface
port-channel 1 is assigned an FC ID (0x111211) and a
domain ID (3) to the next hop switch.
Configures the static route for a specific FC ID and
next hop domain ID and also assigns the cost of the
route.
If the remote destination option is not specified, the
default is direct.
Adds a static route to the RIB. If this is an active route
1
and the FIB records are free, it is also added to the
FIB.
If the cost (metric) of the route is not specified, the
default is 10.
Configures the netmask for the specified route in
interface fc1/1 (or PortChannel). You can specify one
of three routes: ff0000 matches only the domain, ffff00
matches the domain and the area, ffffff matches the
domain, area, and port.
Purpose
Clears the FSPF statistics counters for
the specified VSAN. If an interface
reference is not specified, all counters
are cleared.
Clears the FSPF statistics counters for
the specified interface in VSAN 200.
Cisco MDS 9000 Family Configuration Guide
Clearing FSPF Counters
21-9