Displaying Rlir Information - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Chapter 24 Configuring FICON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Example 24-26 Displays EFMD Statistics
switch# show fabric-binding efmd statistics
EFMD Protocol Statistics for VSAN 1
----------------------------------------
Merge Requests -> Transmitted : 0 , Received : 0
Merge Accepts
Merge Rejects
Merge Busy
Merge Errors
EFMD Protocol Statistics for VSAN 4
----------------------------------------
Merge Requests -> Transmitted : 0 , Received : 0
Merge Accepts
Merge Rejects
Merge Busy
Merge Errors
EFMD Protocol Statistics for VSAN 61
----------------------------------------
Merge Requests -> Transmitted : 0 , Received : 0
Merge Accepts
Merge Rejects
Merge Busy
Merge Errors
Example 24-27 Displays EFMD Statistics for a Specified VSAN
switch# show fabric-binding efmd statistics vsan 4
EFMD Protocol Statistics for VSAN 4
----------------------------------------
Merge Requests -> Transmitted : 0 , Received : 0
Merge Accepts
Merge Rejects
Merge Busy
Merge Errors

Displaying RLIR Information

The Registered Link Incident Report (RLIR) application provides a method for a switchport to send an
Link Incident Record (LIR) to a registered Nx-port. It is a highly-available application.
When a LIR is detected in FICON-enabled switches in the Cisco MDS 9000 Family from a RLIR
Extended Link Service (ELS). It sends that record to the members in it's Established Registration List
(ERL).
In case of multi-switch topology, a Distribute Registered Link Incident Record (DRLIR) Inter Link
Service (ILS) is sent to all reachable remote domains along with the RLIR ELS. On receiving the DRLIR
ILS, the switch extracts the RLIR ELS and sends to the members of the ERL.
The Nx-ports interested in receiving the RLIR ELS send Link Incident Record Registration (LIRR) ELS
request to the management server on the switch. The RLIRs are processed on a per-VSAN basis.
The RLIR data is written to persistent storage when the copy running-config startup-config command
is issued.
OL-6973-03, Cisco MDS SAN-OS Release 2.x
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
-> Transmitted : 0 , Received : 0
Displaying RLIR Information
Cisco MDS 9000 Family Configuration Guide
24-45