Table of Contents
Advertisement
Chapter 43
Monitoring Network Traffic Using SPAN
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Example 43-4 Displays an SD Port Interface with Encapsulation Enabled
switch# show int fc9/32
fc9/32 is up
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Hardware is Fibre Channel
Port WWN is 22:20:00:05:30:00:49:5e
Admin port mode is SD
Port mode is SD
Port vsan is 1
Speed is 1 Gbps
Receive Buffer Size is 2112
<---------------- Displays the enabled encapsulation status
Encapsulation is eisl
Beacon is turned off
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
0 frames input, 0 bytes, 0 discards
0 CRC,
0 unknown class
0 too long, 0 too short
0 frames output, 0 bytes, 0 discards
0 input OLS, 0 LRR, 0 NOS, 0 loop inits
0 output OLS, 0 LRR, 0 NOS, 0 loop inits
Displaying SPAN Information
Cisco MDS 9000 Family Configuration Guide
43-15
Advertisement
Table of Contents
