Verifying The Module Status; Configuring Date And Time - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Verifying the Module Status

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
To use the Cisco MDS 9000 Fabric Manager, refer to the Cisco MDS 9000 Family Fabric Manager
Configuration Guide.
Verifying the Module Status
Before you begin configuring the switch, you need to ensure that the modules in the chassis are
functioning as designed. To verify the status of a module at any time, issue the show module command
in EXEC mode. A sample output of the show module command follows:
switch# show module
Mod
---
2
5
6
8
9
Mod
---
2
5
6
8
9
Mod
---
2
5
6
8
9
* this terminal session
If the status is OK or active, you can continue with your configuration (see
Modules").

Configuring Date and Time

Switches in the Cisco MDS 9000 Family use Universal Coordinated Time (UTC), which is the same as
Greenwich Mean Time (GMT). To change the default time on the switch, issue the clock command from
EXEC mode.
switch# clock set <HH:MM:SS> <DD> <Month in words> <YYYY>
For example:
switch# clock set 15:58:09 23 September 2002
Mon Sep 23 15:58:09 UTC 2002
Where HH represents hours in military format (15 for 3 p.m.), MM is minutes (58), SS is seconds (09),
DD is the date (23), Month is the month in words (September), and YYYY is the year (2002).
Cisco MDS 9000 Family Configuration Guide
4-16
Ports Module-Type
----- ------------------------------- ------------------ ------------
8 IP Storage Services Module
0 Supervisor/Fabric-1
0 Supervisor/Fabric-1
0 Caching Services Module
32 1/2 Gbps FC Module
Sw Hw World-Wide-Name(s) (WWN)
----------- ------ --------------------------------------------------
1.3(0.106a) 0.206 20:41:00:05:30:00:00:00 to 20:48:00:05:30:00:00:00
1.3(0.106a) 0.602 --
1.3(0.106a)) 0.602 --
1.3(0.106a) 0.702 --
1.3(0.106a) 0.3 22:01:00:05:30:00:00:00 to 22:20:00:05:30:00:00:00
MAC-Address(es)
--------------------------------------
00-05-30-00-9d-d2 to 00-05-30-00-9d-de
00-05-30-00-64-be to 00-05-30-00-64-c2
00-d0-97-38-b3-f9 to 00-d0-97-38-b3-fd
00-05-30-01-37-7a to 00-05-30-01-37-fe
00-05-30-00-2d-e2 to 00-05-30-00-2d-e6
Chapter 4
Model Status
DS-X9308-SMIP ok
DS-X9530-SF1-K9 active *
DS-X9530-SF1-K9 ha-standby
DS-X9560-SMAP ok
DS-X9032 ok
Serial-Num
----------
JAB064605a2
JAB06350B1R
JAB06350B1R
JAB072705ja
JAB06280ae9
Chapter 10, "Managing
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Initial Configuration