Table of Contents
Advertisement
Creating an iSNS Client Profile
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
To tag a profile to an interface, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# interface gigabitethernet 4/1
switch(config-if)#
Step 3
switch(config-if)# isns MyIsns
To untag a profile from an interface, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# interface gigabitethernet 5/1
switch(config-if)#
Step 3
switch(config-if)# no isns OldIsns
Use the isns reregister command in EXEC mode to re-register associated iSNS objects with the iSNS
server.
switch# isns reregister gigabitethernet 1/4
switch# isns reregister port-channel 1
Verifying iSNS Client Configuration
Use the show isns profile command to view configured iSNS profiles. Profile ABC has two portals
registered with the iSNS server. Each portal corresponds to a particular interface. Profile XYZ has a
specified iSNS server, but does not have any tagged interfaces configured (see
Example
Example 35-17 Displays Information for Configured iSNS Profiles
switch# show isns profile
iSNS profile name ABC
tagged interface GigabitEthernet2/3
tagged interface GigabitEthernet2/2
iSNS Server 10.10.100.204
iSNS profile name XYZ
iSNS Server 10.10.100.211
Example 35-18 Displays a Specified iSNS Profile
switch# show isns profile ABC
iSNS profile name ABC
tagged interface GigabitEthernet2/3
tagged interface GigabitEthernet2/2
iSNS Server 10.10.100.204
Cisco MDS 9000 Family Configuration Guide
35-60
35-18).
Chapter 35
Purpose
Enters configuration mode.
Configures the specified Gigabit Ethernet
interface.
Tags a profile to an interface.
Purpose
Enters configuration mode.
Configures the specified Gigabit Ethernet
interface.
Untags a profile from an interface.
Example 35-17
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Configuring iSCSI
and
Advertisement
Table of Contents
