Displaying Latency Information - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

In-Order Delivery
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Command
Step 2
switch(config)# fcdroplatency network 5000
switch(config)# fcdroplatency network 6000
vsan 3
switch(config)# no fcdroplatency network
4500
Step 3
switch(config)# fcdroplatency switch 4000
switch(config)# no fcdroplatency switch
4500

Displaying Latency Information

You can view the configured latency parameters using the show fcdroplatency command (see
Example
Example 21-1 Displays Administrative Distance
switch# show fcdroplatency
switch latency value:500 milliseconds
global network latency value:2000 milliseconds
VSAN specific network latency settings
vsan 1 network latency:5000 milliseconds
vsan 2 network latency:2000 milliseconds
vsan 103 network latency:2000 milliseconds
vsan 460 network latency:500 milliseconds
Cisco MDS 9000 Family Configuration Guide
21-14
21-1).
Chapter 21 Configuring Fibre Channel Routing Services and Protocols
Purpose
Configures network drop latency time to be 5000
ms for the network. The valid range is 0 to 60000
ms. The default is 2000 ms.
The network drop latency must be
Note
computed as the sum of all switch latencies
of the longest path in the network
Configures network drop latency time to be 6000
ms for VSAN 3.
Removes the current fcdroplatecy network
configuration (4500) and reverts the switch to the
factory defaults.
Configures switch drop latency time to be 4000 ms
for the switch. The valid range is 0 to 60000 ms.
The default is 500 ms.
Note The switch drop latency parameter should
have the same value in all the switches in
the network
Removes the current fcdroplatecy switch
configuration (4500) and reverts the switch to the
factory defaults.
OL-6973-03, Cisco MDS SAN-OS Release 2.x