About Enhanced Zoning - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Chapter 19 Configuring and Managing Zones
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Example 19-16 Displays Zone Statistics
switch# show zone
zone name lunSample vsan 1
zone name ReadOnlyZone vsan 2
Use the show running and show zone active commands to display the configured interface-based zones
(see
Example 19-17 Displays the Interface-Based Zones
switch# show running
zone name if-zone vsan 1
Example 19-18 Displays the fWWNs and Interfaces in an Active Zone
switch# show zone active
zone name if-zone vsan 1
* fcid 0x7e00b3 [interface fc2/15 swwn 20:00:00:0c:88:00:4a:e2]
* fcid 0x7e00b1 [interface fc2/15 swwn 20:00:00:0c:88:00:4a:e2]
* fcid 0x7e00ac [interface fc2/15 swwn 20:00:00:0c:88:00:4a:e2]
* fcid 0x7e00b3 [fwwn 20:4f:00:0c:88:00:4a:e2]
* fcid 0x7e00b1 [fwwn 20:4f:00:0c:88:00:4a:e2]
* fcid 0x7e00ac [fwwn 20:4f:00:0c:88:00:4a:e2]
A similar output is also available on the remote switch (see
Example 19-19 Displays the Local Interface Active Zone Details for a Remote Switch
switch# show zone active
zone name if-zone vsan 1
* fcid 0x7e00b3 [interface fc2/15 swwn 20:00:00:0c:88:00:4a:e2]
* fcid 0x7e00b1 [interface fc2/15 swwn 20:00:00:0c:88:00:4a:e2]
* fcid 0x7e00ac [interface fc2/15 swwn 20:00:00:0c:88:00:4a:e2]
* fcid 0x7e00b3 [fwwn 20:4f:00:0c:88:00:4a:e2]
* fcid 0x7e00b1 [fwwn 20:4f:00:0c:88:00:4a:e2]
* fcid 0x7e00ac [fwwn 20:4f:00:0c:88:00:4a:e2]

About Enhanced Zoning

The zoning feature complies with the FC-GS-4 and FC-SW-3 standards. Both standards support the basic
zoning functionalities explained in the previous section and the enhanced zoning functionalities
described in this section.
OL-6973-03, Cisco MDS SAN-OS Release 2.x
attribute read-only
Example 19-17 and Example
member interface fc2/15 swwn 20:00:00:0c:88:00:4a:e2
member fwwn 20:4f:00:0c:88:00:4a:e2
member interface fc2/1 swwn 20:00:00:05:30:00:4a:9e
member pwwn 22:00:00:20:37:39:6b:dd
interface fc2/1 swwn 20:00:00:05:30:00:4a:9e
interface fc2/1 swwn 20:00:00:05:30:00:4a:9e
<-----------------Read-write attribute
<-----------------Read-only attribute
19-18).
Example
Cisco MDS 9000 Family Configuration Guide
About Enhanced Zoning
19-19).
19-27