Displaying A Ports Administrative State; Displaying Control Unit Information - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Chapter 24 Configuring FICON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Displaying a Ports Administrative State

Examples
show ficon vsan number portaddress number command displays the blocked state of the port. If a
specific port is prohibited, this command also displays the specifically prohibited port (3) along with the
ports that are prohibited by default (0, 241 to 253, and 255). If a name is assigned, that name is also
displayed.
Example 24-10 Displays an Administratively Unblocked Port
switch# show ficon vsan 2 portaddress 2
Port Address 2(0x2) is not installed in vsan 2
Example 24-11 Displays an Administratively Blocked Port
switch# show ficon vsan 2 portaddress 1
Port Address 2(0x2) is not installed in vsan 2

Displaying Control Unit Information

Example 24-12
Example 24-12 Displays Control Unit Information
switch# show ficon control-device sb3
Control Unit Image:0x80b9c2c
VSAN:20 CU:0x20fe00 CUI:0 CUD:0 CURLP:(nil)
ASYNC LP:(nil) MODE:1 STATE:1 CQ LEN:0 MAX:0
PRIMARY LP:
ALTERNATE LP: VSAN:0 CH:0x0 CHI:0 CU:0x0 CUI:0
Logical Path:0x80b9fb4
VSAN:20 CH:0x200600 CHI:15 CU:0x20fe00 CUI:0 STATE:1 FLAGS:0x1
LINK: OH:0x0 OC:0x0 IH:0x0 IC:0x0
DEV:
SENSE: 00 00 00 00 00 00 00 46
IUI:0x0 DHF:0x0 CCW:0x0 TOKEN:0x0 PCCW:0x0 FCCW:0x0 PTOKEN:0x0 FTOKEN:0x0
CMD:0x0 CCW_FLAGS:0x0 CCW_COUNT:0 CMD_FLAGS:0x0 PRIO:0x0 DATA_COUNT:0
STATUS:0x0 FLAGS:0x0 PARAM:0x0 QTP:0x0 DTP:0x0
CQ LEN:0 MAX:0 DESTATUS:0x0
OL-6973-03, Cisco MDS SAN-OS Release 2.x
24-10 to 24-11 display the administrative state of a FICON port. If the port is blocked, the
Port number is 2(0x2), Interface is fc1/2
Port name is
Port is not admin blocked
Prohibited port addresses are 0,241-253,255(0,0xf1-0xfd,0xff)
Admin port mode is auto
Peer is Unknown
Port number is 2(0x2), Interface is fc1/2
Port name is SampleName
Port is admin blocked
Prohibited port addresses are 0,241-253,255(0,0xf1-0xfd,0xff)
Admin port mode is auto
Peer is Unknown
displays configured control device information.
VSAN:0 CH:0x0 CHI:0 CU:0x0 CUI:0
OH:0x0 OC:0x0 IH:0x0 IC:0x0
30 20 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
Displaying FICON Information
Cisco MDS 9000 Family Configuration Guide
24-33