Clearing The Ivz Database; Verifying Ivz And Ivzs Configuration - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Chapter 18 Configuring Inter-VSAN Routing
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Using the force option of IVZS activation may cause traffic disruption, even for devices that are not
Caution
involved in IVR. For example, if your configuration does not have any active zone sets and the default
zone policy is
force option is used. Because zones are created in the edge VSANs corresponding to each IVZ, traffic
may be disrupted in edge VSANs where the default zone policy is

Clearing the IVZ Database

Clearing a zone set only erases the configured zone database, not the active zone database.
Note
To clear the IVZ database, use the clear ivr zone database command.
switch# clear ivr zone database
This command clears all configured IVZ information.
Note After issuing a clear ivr zone database command, you need to explicitly issue the copy running-config
startup-config to ensure that the running configuration is used when you next start the switch.

Verifying IVZ and IVZS Configuration

Verify the IVZ and IVZS configurations using the show ivr zone and show ivr zoneset commands. See
Example 18-6
Example 18-6 Displays the IVZ Configuration
switch# show ivr zone
zone name sample_vsan2-3
zone name ivr_qa_z_all
Example 18-7 Displays Information for a Specified IVZ
switch# show ivr zone name sample_vsan2-3
zone name sample_vsan2-3
OL-6973-03, Cisco MDS SAN-OS Release 2.x
, then an IVZS activation will fail. However, IVZS activation will go through if the
permit
to Example 18-14.
pwwn 21:00:00:e0:8b:02:ca:4a vsan 3
pwwn 21:00:00:20:37:c8:5c:6b vsan 2
pwwn 21:00:00:e0:8b:06:d9:1d vsan 1
pwwn 21:01:00:e0:8b:2e:80:93 vsan 4
pwwn 10:00:00:00:c9:2d:5a:dd vsan 1
pwwn 10:00:00:00:c9:2d:5a:de vsan 2
pwwn 21:00:00:20:37:5b:ce:af vsan 6
pwwn 21:00:00:20:37:39:6b:dd vsan 6
pwwn 22:00:00:20:37:39:6b:dd vsan 3
pwwn 22:00:00:20:37:5b:ce:af vsan 3
pwwn 50:06:04:82:bc:01:c3:84 vsan 5
pwwn 21:00:00:e0:8b:02:ca:4a vsan 3
pwwn 21:00:00:20:37:c8:5c:6b vsan 2
Configuring IVZs and IVZSs
.
permit
Cisco MDS 9000 Family Configuration Guide
18-25