Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual page 429

Chapter 18 Configuring Inter-VSAN Routing
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Configure IVR zone set and zones. Two zones are required:
Step 8
•
•
Instead of creating two IVR zones, you can also create one IVR zone with the tape and both servers.
Tip
mds(config)# ivr zoneset name tape_server1_server2
mds(config-ivr-zoneset)# zone name tape_server1
mds(config-ivr-zoneset-zone)# member pwwn 10:02:50:45:32:20:7a:52 vsan 1
mds(config-ivr-zoneset-zone)# member pwwn 10:02:66:45:00:20:89:04 vsan 2
mds(config-ivr-zoneset-zone)# exit
mds(config-ivr-zoneset)# zone name tape_server2
mds(config-ivr-zoneset-zone)# member pwwn 10:02:50:45:32:20:7a:52 vsan 1
mds(config-ivr-zoneset-zone)# member pwwn 10:00:ad:51:78:33:f9:86 vsan 3
mds(config-ivr-zoneset-zone)# exit
Step 9 View the IVR zone configuration to confirm that the IVR zone set and IVR zones are properly
configured.
mds(config)# do show ivr zoneset
zoneset name tape_server1_server2
zone name tape_server1
zone name tape_server2
View the zone set prior to IVR zone set activation. Prior to activating the IVR zone set, view the active
Step 10
zone set. Repeat this step for VSANs 2 and 3.
mds(config)# do show zoneset active vsan 1
zoneset name finance_dept vsan 1
zone name accounts_database vsan 1
zone name $default_zone$ vsan 1
Activate the configured IVR zone set.
Step 11
mds(config)# ivr zoneset activate name tape_server1_server2
zoneset activation initiated. check inter-VSAN zoneset status
mds(config)# exit
Verify the IVR zone set activation.
Step 12
mds# show ivr zoneset active
zoneset name tape_server1_server2
zone name tape_server1
zone name tape_server2
OL-6973-03, Cisco MDS SAN-OS Release 2.x
One zone has tape T (pwwn 10:02:50:45:32:20:7a:52) and server S1 (pwwn
10:02:66:45:00:20:89:04).
Another zone has tape T and server S2 (pwwn 10:00:ad:51:78:33:f9:86).
pwwn 10:02:50:45:32:20:7a:52 vsan 1
pwwn 10:02:66:45:00:20:89:04 vsan 2
pwwn 10:02:50:45:32:20:7a:52 vsan 1
pwwn 10:00:ad:51:78:33:f9:86 vsan 3
pwwn 10:00:23:11:ed:f6:23:12
pwwn 10:00:56:43:11:56:fe:ee
pwwn 10:02:50:45:32:20:7a:52 vsan 1
pwwn 10:02:66:45:00:20:89:04 vsan 2
pwwn 10:02:50:45:32:20:7a:52 vsan 1
pwwn 10:00:ad:51:78:33:f9:86 vsan 3
Example Configurations
Cisco MDS 9000 Family Configuration Guide
18-33