Call Home Message Level Feature - Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual

Call Home Message Level Feature

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Command
Step 7
switch(config-callhome)# destination-profile
test1 alert-group inventory
switch(config-callhome)# destination-profile
short-txt-destination alert-group inventory
Step 8
switch(config-callhome)# destination-profile
test1 alert-group linecard-hardware
switch(config-callhome)# destination-profile
short-txt-destination alert-group
linecard-hardware
Step 9
switch(config-callhome)# destination-profile
test1 alert-group supervisor-hardware
switch(config-callhome)# destination-profile
short-txt-destination alert-group
supervisor-hardware
Step 10
switch(config-callhome)# destination-profile
test1 alert-group system
switch(config-callhome)# destination-profile
short-txt-destination alert-group system
Call Home Message Level Feature
The Call Home message level feature allows you to filter messages based on their level of urgency. Each
destination profile (predefined and user-defined) is associated with a Call Home message level threshold.
Any message with a value lower that the urgency threshold is not sent. The urgency level ranges from 0
(lowest level of urgency) to 9 (highest level of urgency), and the default is 0 (all messages are sent).
To configure message level settings for destination profiles, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# callhome
switch(config-callhome)#
Step 3
switch(config-callhome)# destination-profile
test message-level 5
switch(config-callhome)# no
destination-profile oldtest message-level 7
Cisco MDS 9000 Family Configuration Guide
45-8
Chapter 45
Purpose
Optional. Configures user-defined destination
message profile (test1) to receive Call Home
notifications for inventory status events.
Optional. Configures predefined short-text
destination message profile to receive Call
Home notifications for inventory status events.
Optional. Configures user-defined destination
message profile (test1) to receive Call Home
notifications for module-related events.
Optional. Configures predefined short-text
destination message profile to receive Call
Home notifications for module-related events.
Optional. Configures user-defined destination
message profile (test1) to receive Call Home
notifications for supervisor-related events.
Optional. Configures predefined short-text
destination message profile to receive Call
Home notifications for supervisor-related
events.
Optional. Configures user-defined destination
message profile (test1) to receive Call Home
notifications for software-related events.
Optional. Configures predefined short-text
destination message profile to receive Call
Home notifications for software-related events.
Purpose
Enters configuration mode.
Enters Call Home submode.
Optional. Configures the message level urgency
as 5 and above for the user-defined profile
(test1).
Removes a previously configured urgency level
and reverts it to the default of 0 (all messages are
sent).
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Configuring Call Home