Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Configuration Manual page 192

Mds 9000 family
Table of Contents

Advertisement

Manual Upgrade on a Dual Supervisor Switch
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
kickstart compile time:
system image file is:
system compile time:
Hardware
RAM 1024584 kB
bootflash: 1000944 blocks (block size 512b)
slot0:
172.22.92.181 uptime is 0 days 2 hours 18 minute(s) 1 second(s)
Last reset at 970069 usecs after Tue Sep 16 22:31:25 1980
Issue the install module command for the required supervisor module (active or standby). This example
Step 2
displays the command being issued for the standby supervisor module in slot 6.
switch# install module 6 loader bootflash:kickstart-image
Note
Use the show version command to verify the updated image on the supervisor module.
Step 3
switch# show version
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2005, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS:
loader:
kickstart: version 2.1(2) [gdb]
system:
BIOS compile time:
kickstart image file is: bootflash:///eboot2.1.2
kickstart compile time:
system image file is:
system compile time:
Hardware
cisco MDS 9216 ("1/2 Gbps FC/Supervisor")
Intel(R) Pentium(R) III CPU 800MHz with 967036 kB of memory.
bootflash: 501760 blocks (block size 512b)
slot0:
switch
Cisco MDS 9000 Family Configuration Guide
6-22
0 blocks (block size 512b)
Reason: Reset Requested by CLI command reload
System version: 2.1(2)
Service:
If you install a loader version that is the same as the currently installed version, the command
will not execute. When both the current version and the installed version are the same, use the
init system command to force a loader upgrade.
version 1.0.7
version 1.2(2) <---------------New running version
version 2.1(2) [gdb]
0 blocks (block size 512b)
kernel uptime is 0 days 2 hours 15 minute(s) 26 second(s)
7/7/2005 21:00:00 [07/22/2005 04:45:24]
bootflash:///m9500-sf1ek9-mz.2.1.2.bin
7/7/2005 21:00:00 [07/22/2005 04:45:54]
03/20/03
7/7/2005 21:00:00 [07/22/2005 04:25:24]
bootflash:///eisan2.1.2
7/7/2005 21:00:00 [07/22/2005 04:45:54]
Chapter 6
Software Images
OL-6973-03, Cisco MDS SAN-OS Release 2.x

Advertisement

Table of Contents
loading

Table of Contents